S&B Jeep Wrangler JL 392 18-26 6.4L Cold Air Intake (Dry)

S&B Jeep Wrangler JL 392 18-24 6.4L Cold Air Intake (Dry) Looking to enhance the performance of your Jeep Wrangler JL 392 6.4L? The S&B Jeep Wrangler JL 392 18-24 6.4L Cold Air Intake (Dry) is designed to improve airflow while protecting your engine with high-efficiency filtration. This cold air intake system offers increased horsepower, better throttle response, and enhanced fuel efficiency. It features a cotton cleanable filter with a red oil color that helps trap dirt and debris, ensuring that only clean air reaches your engine. Enhanced Airflow and Performance With this cold air intake, you get 55 grams of oil to ensure maximum filtration and protection. Designed specifically for the Jeep Wrangler JL 392 , the system boosts airflow by reducing air restrictions and cooling the air before it enters your engine. The result is improved combustion, leading to increased horsepower and torque. Installation Guide Here is a step-by-step guide for installing the S&B Jeep Wrangler JL 392 18-24 6.4L Cold Air Intake . Preparation : Ensure the vehicle is parked on a flat surface, and disconnect the negative battery cable to prevent electrical issues. Remove Stock Intake : Remove the factory air intake, including the airbox, intake tube, and connected sensors. Install the S&B Airbox : Position the S&B airbox in the factory location, securing it using the OEM mounting points. Make sure all prongs and fasteners are aligned properly. Connect the Intake Tube : Attach the S&B intake tube to both the airbox and the throttle body. Tighten the provided clamps securely. Insert the Air Filter : Place the cotton cleanable filter into the airbox and secure it with the provided clamp. Reconnect Sensors : Reconnect the sensors, including the Mass Air Flow (MAF) sensor, ensuring that they are properly attached. Final Check : Double-check all connections, reconnect the battery, and start the engine to check for error codes or issues. Test Drive : Take the vehicle for a short drive to ensure everything is working correctly and enjoy the performance improvements. Technical Specifications Filter Type : Cotton Cleanable (Red Oiled) Oil Quantity : 55 grams Vehicle Compatibility : Jeep Wrangler JL 392 (2018-2024) Airflow Improvement : Increases airflow, resulting in better throttle response and fuel efficiency Warranty : 2 Years Frequently Asked Questions (FAQ) Q1: How does this intake system improve performance? A1 : By enhancing airflow, the S&B Cold Air Intake optimizes air intake temperatures, leading to better combustion, increased horsepower, and improved throttle response. Q2: Can I clean and reuse the filter? A2 : Yes, the filter is cotton cleanable, meaning it can be washed, oiled, and reused, reducing long-term maintenance costs. Q3: Is this system compatible with aftermarket tuning? A3 : Yes, the S&B Cold Air Intake is compatible with both stock and aftermarket tuning, allowing you to further enhance performance if desired. Q4: How much oil does the filter require? A4 : The filter requires 55 grams of red oil for optimal filtration and protection. Q5: How long does the installation process take? A5 : Installation typically takes about 1 to 2 hours, depending on your experience level.